-
Simple consistent, 4-button
user interface
-
* Extra-large, bold lap times are
0.6" (15mm) in height for easy visibility
-
* Unique "auto turn-on" feature —
"turn it on and forget it" — turn it on first thing on the morning of a race
day, and never worry about missing a lap again. The unit will auto turn-off
but will automatically turn back on when it crosses the transmitter beam.
-
* Auto power-down for extended
battery life
-
* At the end of a lap, a flashing
green or red light indicates a faster or slower lap than the previous.
-
* Accurate to 1/100 second per
lap
-
* Store approximately 2,000 laps
— for many, a full season of racing
-
* Records ambient temperature for
each session.
-
SIMPLISTIC Installation as it uses
1x AA Battery
Each stored Lap contains
the following information:-
* Time of the lap, accurate to
1/100 second
* Date and time of the lap
* The track (or other
identification) of the lap
* A unique session identifier (to
differentiate each race or practice session)
* An indication if was the best
lap of that session
|

We are proud to introduce the newest product in
our lime of timers, the Mini-Lap. A scaled-down version of its
counterpart, the Ultra-Lap, the Mini-Lap is intended to provide the
user with the basic tools needed to time your laps at the track. The
Mini-Lap is housed within a single, molded plastic box and comes
equipped with dual-sided infra-red pickups so that it can receive
transmitter signals from either side of the race track. While it
only stores up to 40 laps, it comes in at less than half the cost of
the Ultra-Lap and is ideal for session-by-session lap timing. |
Other Features:
- * Device can be personalized with
2 lines of data: e.g., PROPERTY OF BILL SMITH
*
This information shows up on the main screen so if the unit is misplaced,
its owner can be identified.
- * Main screen has a battery level
indicator that shows when the batteries need to be replaced
- * Uses 2 readily-available
inexpensive AA batteries
- * Extra-long 6' cable for
flexibility in cable routing
- * Ability to download all lap
data to a PC using the optional (extra-cost) download cable. Includes
software to organize, store and graph lap data.
- * Can be sent back to the factory
and reprogrammed if new features become available.
- * Compatible with AIM Sports
My-Chron beacon device.
- * NEW - Support
for true split times -- multiple transmitters may be placed around the track
and intermediate times within each lap will be recorded. XT's transmitter
will have an additional switch that selects between 'start/finish' and
'split' -- you would set up one transmitter in the start/finish mode and any
number of other transmitter around the track in split mode. The Ultra-Lap
can tell the difference between the two because a different frequency of
infrared pulsing is used. The 'start/finish/ frequency will still be
compatible with AIM devices. The 'split' frequency will not trigger the AIM
devices into another lap.
- * NEW - Much
thinner receiver display, now 0.7" thick as opposed to 1.15" thick.
- * NEW - All
enclosures (I/R receiver, transmitter, and USB download, in addition to main
receiver are machined billet aluminum and powder coated. Previously,
only the main receiver box was aluminum -- the others were plastic. This
new finish is much tougher and abrasion resistant.
|

Transmitter = R695.00 |