M.P” MULTI-PURPOSE SPRAY

“M.P” is a plastic friendly multi-purpose lubricant, demoisturiser, penetrating oil and rust remover for just about any application in and around the car, boat, garage, home and office. Made from only the finest ingredients to military specifications this product is unrivaled in terms of quality and usage.

Multi-purpose Lubricant for just about any moving part in and around the office, home and garage
Demoisturiser, this product will dry out all wet/moist electrical or electronic equipment and circuitry including distributor caps, control units, intercoms, aerials, outdoor light fittings and electrical points.
Penetrating oil enables this product to deep penetrate threaded components dissolving rust and easing/freeing tight and corroded bolts, nuts and all threaded components. E.G exhaust manifold nuts and wheel bolts and/or nuts.
It cleans metal components from dirt, tar, and grime and leaves a thin corrosion protective coating including newly machined components and tar on motor vehicles.

“T.D” TYRE AND DASH SPRAY

“T.D” is a silicone-based product, which means that it offers unrivalled performance and service life. Available in 3 pleasant fragrances in Lavender, Cherry and the more masculine Chyprese perfumes.

· Used on car dashboards and door linings it offers a pleasant in-car fragrance whilst acting as a sun-cream and renewing dull appearance. Silicone is the only product that can offer such advantages.

· It is totally clear and plastic friendly, which means “T.D”, will not stain upholstery and textiles. It is totally safe to spray on delicate instruments.

· It brings the new show-room condition to your car tyres and as silicone is waterproof it will last much longer than conventional oil based products.

· Does not attract dust.

· Ideal for all leather, plastic and vinyl components.

“C.S” CHAIN SPRAY

“C.S” is bar far the best Chain Spray available on the market. It offers today’s Hi-Performance Motor Bikes, Quads, MX-Bikes, Bicycles and Industrial chains and sprockets dramatically increased reliability and service life.

· Light in colour so as not to look to unsightly if applied to liberally and the surface is flung off.

· Provides far better penetration deep into the much need chain pins than wax products providing on-going solid lubrication, thanks to special low-surface tension additives.

· It non-fling/non drip formulation ensures that there is very little annoying fling-off and that it does not attract too much dirt when riding off-road/enduro’s

· Its water resistant formulation can withstand temperatures up to +140.

· Contains extreme pressure and anti-wear additives.

“D.C” DAMP CURE

“D.C” Herschell Damp Cure is a very special product as it is the only product on the market that offers S.A home-owners a user friendly, effective and cost effective means of preventing and curing unsightly damp related problems around the home and office.

· It is a clear non-staining product with a solvent base, which enable the product to penetrate deep into all mortar (brick, concrete, cement, grouting, natural stone) and cure forming a water-repellent zone.

· Sprayed on to the grouting of all showers it seals the shower floor and walls. It should be used as a preventative measure in all showers and as a cure for leaking showers into adjoining passageways and rooms.

· Prevents annoying fungi and algae build up on grouting.

· Sprayed into bricks, once holes have been drilled at 45-degree downward angle, “D.C” will arrest further rising damp problems and allow the moist bricks to dry out and repair.

· This product will prevent the corrosion of concrete steel reinforcing.

· Does not discolour mortar

Applied to weather facing exterior walls “D.C” will help prevent further peeling, fading and weathering of paint

“C.C” CARBURETTOR AND METAL PARTS CLEANER

This highly effective product has 2 definite uses. It is primary used as a conventional carburetor cleaner but has the amazing ability to degrease and power clean unpainted metal components in the garage and on vehicles.

Formulated for rapid removal from the jets, throttle valves and venturi of carburetors all oxidized deposits including those of oil based coastal fuels and coal based in-land fuels aiding easy starting and better performance.
Removes deposits from fuel injectors.
Suitable for cleaning disc brake residues from calipers.
Rapidly cleans gearbox bell housings, differential housings, engine blocks, diesel and fuel pumps, infact all unpainted steel parts.

“A.S” ANTI-SPATTER SPRAY

A non-silicone based fluid/spray with low evaporation, non-stick and heat resistant properties is designed to prevent the adhesion of welding spatter to unwanted metal surfaces.

· Once applied to the nozzle of gas welding equipment it prevents spatter from sticking and blocking the nozzle and thus drastically improves the weld and increases the life of the nozzle.

· Protects jigs and clamps around the work piece from becoming unserviceable due to the build up spatter.

· Protects and allows easy removal of spatter from area of the work piece where spatter is not wanted.

· It also protects areas on work pieces from unwanted electric arc welding spatter.

“H.D” HEAVY-DUTY ENGINE CLEANER

A heavy-duty and powerful degreasing formulation ensures quick and easy cleaning of stubborn and ingrained dirt and grease in and around the engine.

· Water based formulation is environmentally friendly and made to European specifications. This too makes it far gentler on contact with skin than solvent based products but doesn’t compromise on cleaning power.

· Squirt bottle helps for better coverage and to get to difficult to reach places.

“S.S” SILICONE SPRAY

“S.S” is a silicone-based spray with numerous indoor and outdoor applications. Approved by the American Food and Drug Administration this clean, totally clear, non-toxic silicone lubricant gives long service life and excellent thermal stability –70 to +200.

· Unrivalled lubricant for plastic to plastic, wood to plastic, wood to wood and plastic to metal. This would include tight kitchen and office drawers, sliding security gates “MAXIDOR”, curtain runners, caravan-tent grooves and

· Used in industry as a mould release agent in plastic and rubber injection moulding.

· Superior to oil based products in areas of extreme temperature and when spayed on the walls and elements of freezers and fridges it prevents the annoying build-up of ice, the freezing of outdoor locks and prevent ski/snowboard bindings from freezing.

· It renews the appearance and waterproofs rubber, vinyl and plastic components. These include leather handbags. Briefcases and shoes, plastic car bumpers and plastic parts on motorbikes and jet-skis.

· It helps waterproof canvas and tent seams against rain and sleet.

· Anti-static spray prevents static build up in printers.

· Awesome Knitting, Sewing and textile non-staining lubricant for cutting tables, shears, sewing machine tables and ironing presses.

“Z.P” ZINC PROTECTOR SPRAY

“Z.P” is a “Cold Galvanising Spray” which when sprayed onto clean, bear steel surfaces offers unrivalled corrosion/rust protection to all ferrous metal components. Zinc offers “cathodic protection” against rust and can be used as a grey or silver primer or over-coat.

· Designed for those wanting to protect their burglar-bars, security gates, trailers, braai’s, chimney cowlings and carports from damaging rust.

· Can with-stand temperatures exceeding +500

· Quick drying, salt water resistant and excellent adhesion to metal/steel component surfaces.

· Available in both silver and grey colours that can be painted over with both water and oil based paints.

· Repairs and touches-up pre-galvanised metal that has been drilled welded and machined and needs protection.

“E.C” ELECTRONIC CLEANER

Herschell Electronic Cleaner is a must for the cleaning of all electronic and electrical instruments and tools in and around the home and office. Its amazing super-fast drying time, cleaning power and no residue formulation is way ahead of its time.

· Power cleans almost all Electronic and Electrical equipment in the office and home including Computers, keyboards, TV’s, Hi-Fi’s and power-tools.

· Plastic friendly formulation.

· Specifically designed to lift and remove, without oily residues, dust, dirt, flux and other atmospheric deposits from circuit boards of electronic equipment.

“P.W” PROTECTIVE WAX

This is a yellow/light brown wax, which when cured forms a long-term barrier against corrosion of metal surfaces and components. It is a must for all avid automobile restores and panel beaters to offer unrivalled protection of metal parts from rust.

Once cured it forms a thin even layer of wax offering excellent corrosion protection indoors and outdoors.
It penetrates deep into metal seems encasing any dirt and displacing existing moisture to seal and prevent further rust damage. This application would include the important sealing of the inside of fenders and doors where rust starts.
It kills existing rust on contact.
Does not affect paint, plastics, rubber and chrome.
Excellent for the use on the inner of chassis legs, round and square bars where moisture and rust breeds.
Is salt water-resistant and self heals when scratched off.
Offers protection to house hold appliances including fridges, washing machines, garden and security gates, carports, nuts, bolt and other fasteners.
Used in industry to protect newly machined components put into storage or being transported

“M.B” ENGINEERS MARKING BLUE

Formulated specifically for those who work or fabricate with steel, this high-resolution blue “paint” ensures that steel work pieces are correctly marked and laid out ready for machining.

Once applied this bright blue “paint” quickly dries on metal surfaces and when scribed or scratched off with a nail or scriber leaves clear definite lines and marks
It is waterproof but is also easily washed off when required.
Offers high definition and intersections of scribed lines show super high contrast.
Quick drying times and non-flaking.
Ideal for boilermakers, panel beaters, pattern and die makers, toolmakers and construction welders.

“M.F” MACHINING FLUID

This heavy-duty machining/cutting fluid has been specifically formulated for both industrial and domestic use when cutting or machining steel. It offers the user a unique fuss/mess free method of cutting mild to difficult/hard steels.

· “M.F” dramatically increases tool-bit life by the inclusion of extreme pressure lubricants in its formulation, the reduction of heat by greatly reducing the co-efficient of cutting friction.

· It keeps both the tool-bit and work piece cool and well lubricated.

· By lubricating it helps keep cutting edge temper and sharpness thus reducing unnecessary load on machinery and power-tools.

· It greatly helps reduce cutting time and ensures a cleaner a neater cut.

· Its applications include all drilling, tapping, turning, milling, hacksawing, threading, parting, boring and broaching applications.

· Ideal for use by the D.I.Y enthusiast who is tackling larger jobs or is cutting into hard or difficult steels. E.G. Stainless Steel, Bennox, VRN400 and other tempered steels.

“HERSCHELL CLEAN-UP”

This water-based, non-solvent based “green” formulation is ideally suited to those who require a powerful multi-purpose cleaner for any job one can imagine in and around the house, office and workshop. It has fantastic degreasing additives that lift and wash away the most stubborn and ingrained dirt, grease and grime on most surfaces.

· Contains a fresh citrus fragrance to leave surfaces and rooms smelling and looking hygienically clean and fresh.

· Water-based formulation is far gentler on the hands and skin, whilst providing unbelievable cleaning power.

· Can be used in kitchens, bathrooms, tiled floors, walls, showers, garage floors, workshop floors, carpets, rugs, mats, wheels, engines, windows and the list just goes on.

· Ideal for lifting oil stained paving bricks.